Crane Courses

Requirements for all Crane Courses

All Crane Courses are held at our up to date facility located at

Australian Easy Train
35 Kimberly Road
Dandenong Victoria 3175
PH (03) 9706 – 4881

Dress Requirements : Safety Shoes or Boots, High Visibility Clothing and any other PPE you may require. If you require to use gloves please bring them with you.

Equipment Required :
• We supply all equipment required.
• We supply you with the crane which suits the requirements.
• Our crane has undergone the required services and is always up to the requirements of the Australian Standards and is serviced regularly.
• Suitable materials to ‘pigsty’ the cranes outriggers may be fitted
• Slings and chains to perform the required lifts.

Material Required : We supply Learners Guides, Revision Sheets, Assessment Paperwork, and all other Administration Documents that may be required.

Prerequisites :
• You will need to be able to use the English language at a level which will enable you to safely perform work of a high risk nature. As per (6.7 – National Standard for licensing persons performing high risk work 2006)
• You will be required to be in good health and fit to perform the required tasks. Your trainer must be notified of any condition that could affect you performing the training prior to starting the course.
• All students must be at least 18 years of age prior to commencing the course.

Course Assessment :
AET adopts a range of assessment methods to ensure flexibility for clients as well as meeting the specific requirements of the unit(s) from the Transport and Logistics training package.
Assessments methods include practical demonstrations, written tests and oral questioning. Clients who require additional learning support or assistance should inform AET prior to the course commencement to ensure this support is available.

Nationally recognised statement of attainment

All participants will receive a nationally recognized statement of attainment

On successful completion of the course the applicants will need to go individually to an Australian Post office with $60.00 and 100 points of identification for the processing of their licence.
 

INDIVIDUAL COURSE DETAIL

 

OVERHEAD CRANE

(pendant control)
 

Below is an outline of costs involved to complete Overhead Crane Training/Chain & Sling Identification course (pendent controlled Overhead Crane), and on successful completion obtain a Competency Card.

  • Training Fee at AET Pty Ltd $440.00 Includes GST (per applicant)
  • Training Fee at AET Pty Ltd: $880.00 Includes GST (group fee)
  • Training Fee, Dandy area: $1100.00 Includes GST (group fee)
  • Duration: Approx 3 Hours
  • No: of applicants: 1 to 10 applicants

The Overhead Crane/Chain & Sling Identification training consists of theory and practical components, and how to handle chains and slings.

There is no licence for the Overhead Crane/Chain & Sling Identification only a Competency Card is issued.

A TV/Video or DVD must be available for training out on site (at your premises on your crane).

COURSE CONTENT

  • Slinging and Safe Working Loads
  • Weight of the load
  • Rules to follow when slinging and handling a load
  • Stacking
  • Loads and Mobile Cranes
  • Personal Safety Equipment
  • Communication
  • Flexible Steel Wire Rope
  • Chains
  • Flat webbing and round synthetic slings
  • Fibre rope
  • Accesssories
  • Storage
  • Videos Inspection, Care and Storage of Slings

The Safe Operations of Overhead Cranes

Should you require any further information or to make a booking you can contact the office on (03) 9706 4881 or by email: courses@auseasytrain.com.au

 

Licence to operate a Vehicle Loading Crane

 
 
Licence To Operate a Vehicle Loading Crane 10 metre tonne 1CV HRW Licence (TLILIC0012A)

Licence to operate a Vehicle Loading Crane

(Capacity 10 metre tonne and above)

This course is required if you are intending to operate a Vehicle loading crane, capacity of 10 metre tonne and above for the principle purpose of loading and unloading of that vehicle. You can enrol in this course and obtain professional training delivered by a Registered Training Organisation (RTO 4575) certified by WorkSafe

Our experienced trainers will train you with the skills required to obtain this class of HRW licence including how to identify hazards, knowing the different parts of the Vehicle loading crane, performing pre-operational checks, operating the Vehicle loading crane in a safe manner. These are the basic skills you will need to know to be able to operate a Vehicle loading crane in a safe and efficient manner.

We supply you with a 5200Kg @ 3.1mts capacity Hiab Vehicle loading crane, mounted onto a Isuzu truck body which suits the HRW licence requirements.

Course descriptionLicence To Operate a Vehicle Loading Crane 10 metre tonne 2

The Vehicle loading crane course covers the following units:

  • Conduct a full pre-operational check of the Vehicle loading crane
  • Conduct a full pre-operational check of the Vehicle loading crane
  • Shift and place loads of different weights and sizes
  • Monitor site conditions
  • Shut down the Vehicle loading crane as per manufactures specifications
  • Understand the correct communication methods between the operator and dogger

The course is conducted over 3 consecutive days

Course Name : Licence to operate a Vehicle loading crane
Course Code: : TLILIC0012A – WorkSafe HRW Licence (code CV)
Duration : This course runs for 3 X 8 Hour Days

How to calculate the metre tonne rating of your Vehicle loading crane?

Vehicle loading cranes are rated in metre tonnes. This tends to cause some confusion amongst users. It is particularly important to understand the size requirements of your crane, because licensing requirements in Australia for vehicle loading cranes is determined by the rated capacity of the vehicle loading crane.

Vehicle loading cranes rated at 10 metre tonnes or above require a CV license to operate them.

Q: So how is this rating determined?

A: To calculate the metre tonne rating of your crane, you need to:

  1. Refer to your crane’s load chart.
  2. Determine from the load chart the MAXIMUM LOAD your crane can lift.
  3. Determine the MAXIMUM RADIUS it can lift the MAXIMUM LOAD.
  4. Multiply together these 2 numbers (Metres X Tonnes)
  5. If the answer is equal to or greater than 10, then you require a license to operate your Vehicle Loading Crane.

Example: Look at the load chart below from a knuckle boom crane.

Licence To Operate a Vehicle Loading Crane 10 metre tonne 3

Therefore: 3.1 metres x 5.2 tonne = 16.12 metre tonnes

This crane requires a HRW license to operate it.

Licence to operate a Tower Crane

Licence To Operate a Tower Crane 1 CT HRW Licence (CPCCLTC4001A)

Licence to operate a Tower Crane

This course is required if you are intending to operate a tower crane. You can enrol in this course and obtain professional training delivered by a Registered Training Organisation (RTO 4575) certified by WorkSafe

Our experienced trainers will train you with the skills required to obtain this class of HRW licence including how to identify hazards, knowing the different parts of the tower crane, performing pre-operational checks, operating the tower crane in a safe manner. These are the basic skills you will need to know to be able to operate a tower crane in a safe and efficient manner.

We supply you with a 7000Kg capacity FAVCO tower crane which suits the requirements.

Course description

The tower crane course covers the following units:

  • How to plan work
  • Conduct a full pre-operational check of the tower crane
  • Shift and place loads of different weights and sizes
  • Monitor site conditions
  • Shut down the tower crane as per manufactures specifications
  • Understand the correct communication methods between the operator and dogger

The course is conducted over 3 consecutive days

Course Name : Licence to operate a tower crane
Course Code: : CPCCLTC4001A – WorkSafe HRW Licence (code CT)
Duration : This course runs for 3 X 8 Hour Days

Licence to operate a self erecting Tower Crane

Licence To Operate a Tower Crane 1CS HRW Licence (CPCCLTC4002A)

Licence to operate a self erecting Tower Crane

This course is required if you are intending to operate a self-erecting tower crane. You can enrol in this course and obtain professional training delivered by a Registered Training Organisation (RTO 4575) certified by WorkSafe

Our experienced trainers will train you with the skills required to obtain this class of HRW licence including how to identify hazards, knowing the different parts of the self-erecting tower crane, performing pre-operational checks, operating the self-erecting tower crane in a safe manner. These are the basic skills you will need to know to be able to operate self-erecting tower crane in a safe and efficient manner.

We supply you with a self erecting tower crane which suits the requirements

Course description

The tower crane course covers the following units:

  • How to plan work
  • Conduct a full pre-operational check of the self-erecting tower crane
  • Shift and place loads of different weights and sizes
  • Monitor site conditions
  • Shut down the self-erecting tower crane as per manufactures specifications
  • Understand the correct communication methods between the operator and dogger

The course is conducted over 3 consecutive days

Course Name : Licence to operate a self-erecting tower crane
Course Code: : CPCCLTC4002A – WorkSafe HRW Licence (code CS)
Duration : This course runs for 3 X 8 Hour Days


 

Licence to operate a Non-Slewing Mobile Crane >3t.

Licence To Operate a Non Slewing Mobile Crane 1 CN HRW Licence (TLILIC3006A)

Licence to operate a Non-Slewing Mobile Crane >3t.

This course is required if you are intending to operate a non-slewing mobile crane with a capacity of 3 tonnes and above. You can enrol in this course and obtain professional training delivered by a Registered Training Organisation (RTO 4575) certified by WorkSafe

Our experienced trainers will train you with the skills required to obtain this class of HRW licence including how to identify hazards, knowing the different parts of the non-slewing mobile crane, performing pre-operational checks, operating the non-slewing mobile crane in a safe manner. These are the basic skills you will need to know to be able to operate a non-slewing mobile crane in a safe and efficient manner.

Tele-Handlers are also regarded as a non-slewing mobile crane if it has a jib attachment fitted. We supply you with a Franna Crane which suits your course requirements.

Course description

The non-slewing mobile crane course covers the following units: Licence To Operate a Non Slewing Mobile Crane 2

  • How to plan work
  • Conduct a full pre-operational check of the non-slewing mobile crane
  • Shift , place and transport loads of different weights and sizes
  • Monitor site conditions
  • Shut down the non-slewing mobile crane as per manufactures specifications
  • Understand the correct communication methods between the operator and dogger

The course is conducted over 3 consecutive days

Course Name : Licence to operate a non-slewing mobile crane
Course Code: : TLILIC3006A – WorkSafe HRW Licence (code CN)
Duration : This course runs for 3 X 8 Hour Days

Licence to operate a Slewing Mobile Crane up to 20t

C6 HRW Licence (TLILIC4009A)

Licence to operate a Slewing Mobile Crane up to 20t

This course is required if you are intending to operate a slewing mobile crane up to 20 tonnes. You can enrol in this course and obtain professional training delivered by a Registered Training Organisation (RTO 4575) certified by WorkSafe

Our experienced trainers will train you with the skills required to obtain this class of HRW licence including how to identify hazards, knowing the different parts of a slewing mobile crane, performing pre-operational checks, operating the slewing mobile crane in a safe manner. These are the basic skills you will need to know to be able to operate a slewing mobile crane in a safe and efficient manner.

We supply you with a 2520Kg capacity Meada slewing mobile crane mounted onto a Yanmar track body which suits the requirements.

Course description Licence To Operate a Slewing Mobile Crane up to 20ft 2

The slewing mobile crane course covers the following units:

  • How to plan work
  • Conduct a full pre-operational check of the slewing mobile crane
  • Shift and place loads of different weights and sizes
  • Monitor site conditions
  • Shut down the slewing mobile crane as per manufactures specifications
  • Understand the correct communication methods between the operator and dogger

The course is conducted over 3 consecutive days

Course Name : Licence to operate a slewing mobile crane up to 20 tonnes
Course Code: : TLILIC3008A – WorkSafe HRW Licence (code C2)
Duration : This course runs for 3 X 8 Hour Days

Licence to operate a Slewing Mobile Crane up to 60t

Licence To Operate a Slewing Mobile Crane up to 100ft 1 C1 HRW Licence (TLILIC4010A)

Licence to operate a Slewing Mobile Crane up to 60t

This course is required if you are intending to operate a slewing mobile crane up to 60 tonnes. You can enrol in this course and obtain professional training delivered by a Registered Training Organisation (RTO 4575) certified by WorkSafe

Our experienced trainers will train you with the skills required to obtain this class of HRW licence including how to identify hazards, knowing the different parts of a slewing mobile crane, performing pre-operational checks, operating the slewing mobile crane in a safe manner. These are the basic skills you will need to know to be able to operate a slewing mobile crane in a safe and efficient manner.

We supply you with a 25000Kg capacity XCMG slewing mobile crane which suits the requirements

Course description Licence To Operate a Slewing Mobile Crane 2

The slewing mobile crane course covers the following units:

  • How to plan work
  • Conduct a full pre-operational check of the slewing mobile crane
  • Shift and place loads of different weights and sizes
  • Monitor site conditions
  • Shut down the slewing mobile crane as per manufactures specifications
  • Understand the correct communication methods between the operator and dogger

The course is conducted over 3 consecutive days

Course Name : Licence to operate a slewing mobile crane up to 60 tonnes
Course Code: : TLILIC43009A – WorkSafe HRW Licence (code C6)
Duration : This course runs for 3 X 8 Hour Days

Licence to operate a Slewing Mobile Crane up to 100t

C2 HRW Licence (TLILIC3008A)

Licence to operate a Slewing Mobile Crane up to 100t

This course is required if you are intending to operate a slewing mobile crane up to 100 tonnes. You can enrol in this course and obtain professional training delivered by a Registered Training Organisation (RTO 4575) certified by WorkSafe

Our experienced trainers will train you with the skills required to obtain this class of HRW licence including how to identify hazards, knowing the different parts of a slewing mobile crane, performing pre-operational checks, operating the slewing mobile crane in a safe manner. These are the basic skills you will need to know to be able to operate a slewing mobile crane in a safe and efficient manner.

We supply you with a 80000Kg capacity sumitomo crawler slewing mobile crane which suits the requirements

Course description Licence To Operate a Slewing Mobile Crane up to 100ft 2

The slewing mobile crane course covers the following units:

  • How to plan work
  • Conduct a full pre-operational check of the slewing mobile crane
  • Shift and place loads of different weights and sizes
  • Monitor site conditions
  • Shut down the slewing mobile crane as per manufactures specifications
  • Understand the correct communication methods between the operator and dogger

The course is conducted over 3 consecutive days

Course Name : Licence to operate a slewing mobile crane up to 100 tonnes
Course Code: : TLILIC4010A – WorkSafe HRW Licence (code C1)
Duration : This course runs for 3 X 8 Hour Days

Licence to operate a Slewing Mobile Crane over 100t

Licence To Operate a Slewing Mobile Crane up to 100ft 1 C0 HRW Licence (TLILIC4011A)

 

Licence to operate a Slewing Mobile Crane over 100t

 

This course is required if you are intending to operate a slewing mobile crane over 100 tonnes. You can enrol in this course and obtain professional training delivered by a Registered Training Organisation (RTO 4575) certified by WorkSafe

Our experienced trainers will train you with the skills required to obtain this class of HRW licence including how to identify hazards, knowing the different parts of a slewing mobile crane, performing pre-operational checks, operating the slewing mobile crane in a safe manner. These are the basic skills you will need to know to be able to operate a slewing mobile crane in a safe and efficient manner.

We supply you with a slewing mobile crane which suits the requirements.

Course description Licence To Operate a Slewing Mobile Crane up to 100ft 2

The slewing mobile crane course covers the following units:

  • How to plan work
  • Conduct a full pre-operational check of the slewing mobile crane
  • Shift and place loads of different weights and sizes
  • Monitor site conditions
  • Shut down the slewing mobile crane as per manufactures specifications
  • Understand the correct communication methods between the operator and dogger

The course is conducted over 3 consecutive days

 

Course Name : Licence to operate a slewing mobile crane over 100 tonnes
Course Code: : TLILIC4011A – WorkSafe HRW Licence (code C0)
Duration : This course runs for 3 X 8 Hour Days

 

National Recognised Training LogoWorksafe Logo


Don't Be Shy. Get In Touch.

If you are interested in working together, send us an inquiry and we will get back to you as soon as we can!

Contact Us

Share This
Menu